This Grade is Specially Compounded Rubber Cover recommended for good resistance to cutting and gouging and conforms to abrasion, loss value. This is recommended for conveying, heavy, sharp, highly abrasive materials like metallic ores, granite, limestone, coal, blast furnace, slag and clinker, etc. Belts made with this grade are as per International Standards IS 1891 (Part-I).

This is recommended for compounded rubber cover grade handling moderately abrasive material. Conforms to the maximum abrasion loss value specified for Grade like sized coal, ash, chalk, bauxite, etc. Conforms to International Standards IS 1891 (Part-I).

Compounded rubber cover grade recommended for handling materials like alumina, ash, chemicals, etc., having material temperature over 65ºC for coarse and 120º C for fine materials. Conform to International Standards IS 1891 (Part-II) for HR-Type T-I Grade.

Compounded rubber cover grade to provide adequate heat resistance for handling material temperatures over 120ºC for coarse and 150ºC for fine materials. Conforms to International Standards IS 1891 (Part-II) for HR Type T-2 Grade.

Compounded rubber cover grade to provide adequate heat resistance for handling material temperatures over 150ºC for coarse and 180ºC for fine materials. Conforms to International Standards IS 1891 (Part-II) for HR Type T-3 Grade.

Specially compounded rubber cover grade provided excellent heat resistance & moderate abrasion wear resistance characteristics & is recommended for material temperatures over 200ºC for fine materials.

These are Fire Resistant and Antistatic Properties. Grade is recommended for use where Fire Hazard exists, eg. Thermal Plants, Underground Mines. The important characteristic is self-extinguishable cover rubber and meeting the drum friction test. Conforms to International Standards IS 1891 (Part – V).

Composed of Synthetic Rubber Compounds. This is resistant to Mineral, Vegetable, Animal Oils and Fats. As per IS 1891 (Part – III).

Specially designated with Nontoxic Rubber Compounds for use in the food processing and Pharmaceutical Industry. As per International Standards IS 1891 (Part – IV).

^Top